GAMOL LUBRICANTS

GAMOL INDUSTRIAL LUBRICANT OILS

GAMOL SPINDLE OILS

GAMOL SPINDLE OILS

Gamol Spindle Oil is a high quality, corrosion and oxidation reserved spindle oil that is used in various industries. In addition, they have excellent rust preventing, demulsibility, foam suppressing and air release properties. This oil prevents sludge deposits, reduces wear and tear, rust/corrosion of components, and provides trouble free operations.


PRODUCT FEATURES

    • Oxidation stability
    • Longer Spindle bearing life
    • Rust & corrosion protection
    • Low viscosity products to facilitate heat reduction
    • Optimum Performance
    • Extended maintenance intervals
    • Increased Productivity
    • Decreased maintenance cost
    • Reduced wear
    • Lower overall waste





GAMOL COMPRESSOR OILS

GAMOL COMPRESSOR OILS

Gamol Compressor Oil is specially developed compressor oils to provide satisfactory lubrication under prolonged high temperature & load conditions. It is formulated with selected base stocks & special compounding agent to give excellent resistance to washing effect of water. It is further blended with anti-rust & anti-corrosion agent & offers good fluidity at low temperature.


PRODUCT FEATURES

    • Excellent thermo-oxidative stability controls the formation of sludge & varnish on valves & piston crowns and improves oil life resulting in improved equipment reliability, availability and efficiency
    • Low ash and carbon forming tendency ensures improved valve performance and reduced potential for fires and explosions in the discharge systems
    • Exceptional wear and rust protection results in reduced maintenance costs and longer equipment life
    • Superior demulsibility reduces oil carryover and corrosion, maintains lubrication efficiency, reduces sludge formation and improves life of condensers


NO PROPERTY 32 46 68 100 150 220 320
1 Kin Viscosity at 40°C, cSt 29-35 43-49 64-70 95-105 145-155 205-235 300-340
2 VI Min. 95 95 95 95 95 90 90
3 Flash Point COC, °C Min. by ASTM D 92 196 200 204 210 220 230 250



GAMOL WAY SLIDE WAY OILS

GAMOL WAY SLIDE WAY OILS

Gamol Way Slide Way Oil is high-performing oil prepared using premium ingredients to offer excellent protection, efficient lubrication, and high stability.


PRODUCT FEATURES

    • Low frictional properties reduce chatter and stick-slip of slides and ways and lead to improved surface finish and dimensional accuracy of work pieces
    • Excellent demulsibility provides ready separation from soluble cutting fluids and leads to prolonged coolant life and reduced cost of replacement and disposal
    • Superior metal wetting properties and adhesiveness resist wash-off from critical surfaces and protect from attack of high pH coolants
    • Good filterability provides easy circulation through filters and reduces stick-slip, chatter and wear
    • Excellent anti-wear performance provides high levels of protection for gears, bearings and slides
    • Effective rust and corrosion inhibitors provide enhanced protection of machine tool slides even in presence of liquid cutting fluids
    • Good thermal and oxidative stability keeps sliding surfaces clean and resists oil degradation thereby increasing its service life


NO PROPERTY 32HD 68HD 150HD 220HD
1 Gravity, API 31.0 30.0 29.5 28.5
2 Viscosity, cST @40°C 32.0 68.0 150.0 220.0
3 Viscosity, cST @100°C 5.5 9.1 15.0 19.8
4 Viscosity Index 105.0 110.0 100.0 103.0



GAMOL STRAIGHT / NEAT CUT OILS

GAMOL STRAIGHT / NEAT CUT OILS

Gamol Straight / Neat Cut Oil is prepared using oil-based materials containing extreme pressure (EP) additives such as Chlorine and Sulphur added at different levels for enhanced tool life and surface finish.


PRODUCT FEATURES

    • High Speed
    • Easy in Drilling
    • Easy in Cutting
    • Easy in Sawing
    • Easy in Threading
    • Easy in Tapping
    • Easy in Machining


NO PROPERTY NEAT_CUT_A NEAT_CUT_B
1 Performance Level Met IS 3065, Type 2/Gr 2 IS 3065, Type 2/Gr 2
2 Viscosity @40°C 18-22 23-26
3 Flash Point, COC, °C 158 154
4 SAP Value, mg KOH/gm 6.0 Min 6.0 Min
5 Inactive Sulphur Present Present



GAMOL SOLLUBLE CUTTING OILS

GAMOL SOLLUBLE CUTTING OILS

Gamol Soluble Cutting Oil is prepared to offer a stable emulsion throughout prolonged usage.


PRODUCT FEATURES

    • Exceptional anti-corrosion and rust preventative
    • Stable milky emulsions with water having hardness up to 400-800 PPM
    • Highly satisfactory dissipation and cooling properties resulting in excellent surface finishes and longer tool life
    • Doesn’t contain ingredients harmful to operation
    • Better hard water stability with superior cast iron corrosion test results
    • Meets the specification requirements of BIS 1115-1986 and DEF STAN 91-23/1 (Grade ZX-1)


NO PROPERTY VALUE
1 Viscosity @40°C, cSt 1
2 Pour Point, °C -15
3 Flash Point, COC, °C 150
4 Color L 4.0



GAMOL ANTI CORRSION AND RUST PREVENTIVE OILS

GAMOL ANTI CORRSION AND RUST PREVENTIVE OILS

Rust appears on iron when it comes in contact with water or oxygen. It is a major problem when dealing with metal objects and causes a great deal of unwanted damage and expense. Gamol Anti -Corrosion & Rust Preventive Oil forms stable film on the iron, reduces run-off loss and thus, increases reliability and provides excellent long-term indoor protection against rust and corrosion. They are widely used for protecting components previously exposed to water-containing machines.


PRODUCT FEATURES

    • Exceptional anti-corrosion and rust preventative
    • Stable milky emulsions with water having hardness up to 400-800 PPM
    • Highly satisfactory dissipation and cooling properties resulting in excellent surface finishes and longer tool life
    • Do not contain ingredients harmful to operation
    • Better hard water stability with superior cast iron corrosion test results


NO PROPERTY 175 185 275 275_S
1 Flash Point COC °C (Min) 30 30 40 40
2 Non Volatile Matter Wt % 22 47 - -
3 Copper Strip Corrosion 3 hr 1 1 1 1
4 Coverage, Sq. m/L 45 25 75 75



GAMOL THERMIC FLUID OILS

GAMOL THERMIC FLUID OILS

To ensure reliable performance of heat transfer system proper selection of thermic fluid is very important. Gamol Thermic Fluid has good characteristics of thermal transmission.


PRODUCT FEATURES

    • Good oxidation and thermal stability
    • Low volatility characteristics
    • Prevents formation of sludge, rust and corrosion
    • Sufficiently high Viscosity Index, preventing too much viscosity drop during its hot run
    • Extended maintenance intervals - resists oil cracking, oxidation and thickening
    • System efficiency - low viscosity enables excellent fluidity and heat transfer over a wide temperature range
    • Wear protection- non corrosive and has high solvency


NO PROPERTY THERMIC_32 THERMIC_68
1 Viscosity @ 40 °C 30-34 66-70
2 Flash Point COC °C (Min) 202 Min 220 Min
3 Viscosity Index 90 90



GAMOL HEAT QUENCHING OILS

GAMOL HEAT QUENCHING OILS

Gamol Heat Quenching Oil is prepared from herbal base oils to provide low pour point, low floe point, good solubility in liquefied refrigerants & good chemical stability. It has high fluidity at very low temperatures, resists deposit formation & has reduced tendency to foam. It ensures higher condenser efficiency and reduced compressor valve maintenance due to fewer deposits. It also imparts anti-wear & rust protection properties.


PRODUCT FEATURES

    • Thermally stable
    • High performance
    • High speed
    • Excellent oxidation
    • High flash point
    • Low viscosity
    • Good wetting and penetration
    • Hardening properties
    • Temperature withstands till 450°C
    • Meets the requirements of BIS 2664-1980


NO PROPERTY 11 22 32 44 68
1 Viscosity at 40°C, cSt 44540 20-24 30-34 42-46 66-70
2 Flash Point, °C, COC 150 180 190 210 210
3 Fire Point, °C 145 183 203 220 220
4 Rams, Carbon Residue 0.024 0.06 0.07 0.07 0.07



GAMOL DI ELECTRIC FLUID EDM 250 OILS

GAMOL DI ELECTRIC FLUID EDM 250 OILS

Gamol Di-Electric Fluid EDM 250 Oil is designed to resist thermal degradation from high-amperage Applications. It is one of the longest lasting dielectric oils available and can last up to 3 or more years. EDM-250 has low viscosity for excellent flushing and finishing. It also helps prevent the clogging of diatomaceous earth and edge-wafer disposable cartridge filters.


PRODUCT FEATURES

    • Good dielectric strength
    • High flash point
    • Clear, colorless formula
    • Low viscosity and power factor
    • Extends fluid life
    • Resists electrode wear
    • Better surface quality
    • Approved for use in Nuclear facilities
    • Reduces DC Arcing
    • High API gravity allows rapid settling of particles in filter





GAMOL TRANSFORMER OILS

GAMOL TRANSFORMER OILS

Insulating oil in an electrical power transformer is commonly known as transformer oil. It is normally obtained by fractional distillation and subsequent treatment of crude petroleum.


PRODUCT FEATURES

    • Excellent insulating characteristics
    • High dielectric strength
    • Low power factor inhibited to minimize the formation of acids and sludge from oxidation
    • Better heat transfer properties than other traditional oil
    • Good low temperature fluidity due to very low pour point
    • Non-corrosive to copper and copper alloys
    • Resists oxidation and deposit formation
    • Hardening properties
    • Meets the specification requirements of IEC 2996 Class II: 1982 standard specifications


NO PROPERTY UNIT VALUE
1 Density at 20°C Kg/dm3 0.895
2 Flash Point, PMCC °C 130
3 Pour Point °C -45
4 Water Content, Bulk/Drum ppm 30/40
5 As Delivered / After Treatment KV 30/50
6 Sludge % 0.1



GAMOL INDUSTRIAL GREASE OILS

GAMOL INDUSTRIAL GREASE OILS

Gamol Industrial Grease Oil is advanced formulations are designed to provide all-around balanced performance for severe conditions experienced by today’s industrial and mobile equipment.


PRODUCT FEATURES

    • Excellent resistance to oil separation which reduces leakage, improves reliability and coupling protection
    • Excellent EP / anti-wear protection, helps reduce coupling wear even when misaligned, helps to lower maintenance costs
    • Excellent high temperature stability, long grease life and helps to extend intervals
    • Good resistance to rust and corrosion
    • Resists oxidation and deposit formation
    • Fine hardening properties
    • Meets the requirements of BIS 7623-1993 regular type grade specifications





GAMOL CRANK CASE OIL

GAMOL CRANK CASE OIL

There is a great demand for crankcase lubrication along with the capacity of water tolerance, long-term bearing life and protection against corrosion. Gamol Crank Case Oil protects against corrosion and wear, and also provides similar load-bearing capabilities at any geographic location.


PRODUCT FEATURES

    • Highly protect from wear
    • Highly protects from oxidation, rust and corrosion
    • Excellent control on nitration
    • Exceptional control on deposits and wear
    • Assures long pump life
    • Low maintenance
    • The oil’s quality meets API specification




GAMOL PUMPSET OIL

GAMOL PUMPSET OIL

Gamol Pumpset Oil 20W40 is moderate duty engine oil.


PRODUCT FEATURES

    • Offers smooth functioning and good lubricity
    • Reduced oil consumption
    • Longer engine life
    • It will be run 10000 Hrs


NO PROPERTY VALUE
1 SAE Viscosity Grade 20 W 40
2 Viscosity at 100°C, cSt 14 - 16
3 Total Base Number 130 Min
4 Flash Point, °C, COC, Min 10
5 Pour Point, °C -24
6 Viscosity Index 110



GAMOL WIRE DRAW 300 OILS

GAMOL WIRE DRAW 300 OILS

Gamol Wire Draw 300 Oil is a non-staining, high performance mineral oil based lubricant, having good cooling abilities. It is specially developed for high speed and deep drawing applications of metals. It provides optimum film strength, lubricity and has good metal wetting characteristics.


PRODUCT FEATURES

    • Provides optimum film strength, lubricity and good metal wetting characteristics
    • Excellent cooling abilities


NO PROPERTY VALUE
1 Appearance Clear to Opaque Liquid
2 Color L6.0 to L8.0
3 Kvis @40°C 280 to 320
4 Flash Point 240° Min
5 Sap Value mgKOH/gm 16 to 22
6 Density @29.5°C 0.935



GAMOL TEXTILE MACHINERY OILS 30/100/150/220/320

GAMOL TEXTILE MACHINERY OILS 30/100/150/220/320

Gamol Textiles Machinery Oil possesses good scour ability & superior tackiness characteristics. It thereby reduces possibility of staining the clothes in different stages of cloth manufacturing in textile mills. It also provides protection against rust and corrosion besides minimizing wear.


PRODUCT FEATURES

    • It is highly refined, high viscosity index oil
    • It has anti-oxidant, anti-corrosion additives together with anti-wear and dispersant properties
    • It is specially recommended for ring spindles producing low fluid friction and power energy saving and also offer resistance to rusting
    • Prevents sludge and varnish deposits
    • Provides long service life


NO PROPERTY 30 100 150 220 320
1 Kinematic Viscosity @40°C - 95-105 142-158 210-230 305-335
2 Viscosity Index 90 90 90 90 90
3 Flash Point 200 210 210 210 220
4 Pour Point -6 -6 -6 -6 -6



GAMOL SUGAR MILL - ROLL BEARING 40/60/90 OILS

GAMOL SUGAR MILL - ROLL BEARING 40/60/90 OILS

Gamol Sugar Mill-Roll Bearing Oil is prepared with high viscosity lubricating oil base stocks and fortified with selected non-toxic mild EP and special compounding agents.


PRODUCT FEATURES

    • Excellent lubricating properties
    • Anti-depressant wear & tear properties
    • Provides long service life
    • Resists foaming
    • Chemically stable
    • Lowers maintenance cost
    • Special compounding agents and selected non-toxic bio EP additives


NO PROPERTY 40 60 90
1 Kinematic Viscosity @100°C 37-43 57-63 86-94
2 Flash Point, °C (COC) Min 200 200 200



GAMOL STEAM TURBINE 460/680/1000 OILS

GAMOL STEAM TURBINE 460/680/1000 OILS

Gamol Steam Turbine Oil is created with unique blending of gas turbine oil, steam turbine oil and hydroelectric turbine oil to protect the parts of even the most high-maintenance machines. It features low ecotoxicity for environmentally sensitive applications. It reduces environmental impact as compared to other oils.


PRODUCT FEATURES

    • Prevents sludge and varnish deposits
    • Provides long service life
    • Rapidly separates from water
    • Resists foaming
    • Chemically stable
    • Lowers maintenance cost
    • Meets BIS 1012-1987, DIN 51515, Part1 specifications

NO PROPERTY 460 680 1000
1 Kinematic Viscosity @100°C 440-480 640-720 950-1050
2 Viscosity Index 80 80 80
3 Flash Point, °C Min 250 250 250



GAMOL GAS TURBINE 32/46/57/68 OILS

GAMOL GAS TURBINE 32/46/57/68 OILS

Gamol Gas Turbine Oil is created with unique blending of gas turbine oil, steam turbine oil and hydroelectric turbine oil to protect the parts of even the most high-maintenance machines. It features low ecotoxicity for environmentally sensitive applications. It reduces environmental impact as compared to other oils.


PRODUCT FEATURES

    • Prevents sludge and varnish deposits
    • Provides long service life
    • Rapidly separates from water
    • Resists foaming
    • Chemically stable
    • Lowers maintenance cost
    • Meets BIS 1012-1987, DIN 51515, Part1 specifications

NO PROPERTY 460 680 1000
1 Kinematic Viscosity @100°C 440-480 640-720 950-1050
2 Viscosity Index 80 80 80
3 Flash Point, °C Min 250 250 250



GAMOL REFIGERATOR COMPRESSOR OILS

GAMOL REFIGERATOR COMPRESSOR OILS

The life of refrigeration compressors is closely depends on the high quality refrigeration oils.


PRODUCT FEATURES

    • Possess high fluidity at very low temperature
    • Resist deposit formation and have reduced tendency to foam
    • Ensure higher condenser efficiency and reduced compressor valve maintenance due to less deposits
    • Imparts anti-wear and rust protection properties
    • Meets DIN 51506 VD-L group & ISO DIS-6521 specifications





GAMOL INSULATION OILS

GAMOL INSULATION OILS

It is mostly based on mineral oil.


PRODUCT FEATURES

    • Excellent insulating characteristics
    • Hi di electric strength
    • Aromatic process oil is specially developed for use as extender oil in the manufacture of styrene butadience rubber
    • Low power factor inhibited to minimize the formation of acids and sludge from oxidation
    • Excellent heat transfer properties than other traditional oil
    • Good low temperature fluidity due to very low pour point
    • Non-corrosive to copper and copper alloys
    • High flash point, free from PCBs
    • Compatible with material used in transformers and equipments
    • Resists oxidation and deposit formation